Easy Rider® speed bumps effectively reduce speeds to between 2-5 mph, making them an ideal solution for parking lot use. They are designed to return safety to areas with concentrated pedestrian use. The preformed units are quick and easy to install and conform to almost any road surface. The Traffic Logix rubber speed bumps are available in 4' and 6' lengths. Embedded highway tape provides for excellent visibility, even in poor lighting conditions.   Buy Now!

To see more photos of Easy Rider speed bumps, view our photo galleries.

Ideal parking lot solution

Traffic Logix speed bumps are a maintenance-free parking lot solution that enhance safety while lowering insurance premiums for lot owners

Channeled bottom

The speed bumps have a channeled bottom to facilitate drainage and to cover piping or cabling.

Environmentally friendly

Made of 100% recycled rubber, Traffic Logix speed bumps are an eco-conscious way to protect your streets.

Cost effective

Rubber speed bumps are long-lasting and removable for years of continuous use. They will not warp, crack, chip, or rot. Other solutions often require costly replacements while the Traffic Logix speed bumps can simply be removed and reinstalled as necessary.

Highly visible

With highly visible tape embedded into each unit, the bumps are highly visible, even at night or in poor lighting conditions. Optional cat-eye reflectors enhance visibility further for night time driving.

Driver acceptance

Prefabricated units offer consistency at all locations, an important factor for motorist acceptance and ease of use. Unlike concrete and asphalt, rubber units maintain their shape over time and do not contract with heat or vehicle pressure.

Simple Installation

Traffic Logix speed bumps are quick and easy to install. They can be installed in sections to create varying lengths.

Removable

The speed bumps can be removed for road resurfacing, snow plows, or to test the products at numerous locations. Unlike asphalt and concrete which must be destroyed during removal, the rubber bumps can simply be removed and reinstalled.

Long lasting

The Traffic Logix speed bumps are maintenance free and built to resist ultraviolet light, moisture, oil, temperature fluctuations, inclement weather conditions, and ongoing vehicle traffic.

Three Year Warranty

Three year warranty on parts and labor excluding damage related to vandalism, abuse, and/or theft.

Specifications Printer-Friendly Version

Bump: 4' (L) or 6' (L) x 12" (W) X 2 ¼" (H)

Weight: 32 lb (4'), 51 lb (6')

End Cap: 9" (L) x 12" (W) x 2 ¼" (H)

Weight: 5.5 lb

Install Guide

Components

Easy Rider® speed bumps

1/2" (diameter), 14" (length) rebar spikes for asphalt or lag bolts with metal shields for concrete - available at GNR

What You Need
  • Gloves, safety glasses
  • Traffic cones, drums or barricades for securing the site
  • Mallet
  • Heavy duty electric drill
  • 1/2" masonry bit and, if installed with lag bolts: a masonry bit required for the metal shields - consult bit size on side of shield
  • A drive socket and power tool for installation of the lag bolts

The flexible design of the Easy Rider® Speed Bump allows the product to conform to the contour of uneven road surfaces and can be installed on both asphalt and concrete. 

Installations Instructions for Asphalt: Installation of Easy Rider® Speed Bumps with spikes
  1. Drill 1/2" diameter holes (3 - 4" in depth) in the asphalt through the product's holes.
  2. Drive 1/2" rebar spike (14" long) through the holes in the product. 
Installation Instructions for Concrete: Installation of Easy Rider® Speed Bumps with lag bolts and metal shields
  1. Use 1/2" or 5/8 lag bolts (5 1/2" long).
  2. Drill 1/2" diameter pilot holes (3 - 4" in depth) through the product's installation holes.
  3. Remove the product; re-drill the holes for the diameter and depth required by the metal shields.
  4. Install the metal shields, re-position the product and bolt with lag bolts. 
Maintenance

Speed bumps require minimal maintenance. Periodically inspect the bolts and tighten if necessary.

Installation Instructions for Concrete or Asphalt: Installation of Easy Rider® Speed Bumps with PL Premium Adhesive
Components
  • Easy Rider® speed bumps
  • PL Premium Adhesive - available at GNR
What You Need
  • Gloves, safety glasses
  • Traffic cones, drums or barricades for securing the site
  • Street broom for cleaning the installation area
  • Toluene 
  • Sanding tool (i.e. belt sander)
Installation Instructions
  1. Clean the installation surface (concrete) from dust, water, or grease. The concrete surface must be completely dry.
  2. Wash the bottom of the rubber speed bump with toluene until no slippery surface can be detected. Sand down the surface of the rubber in order to remove any residue from the mold release or other contaminants.
  3. Apply six (6) beads about 3/8" wide of the PL Premium adhesive on the cleaned bottom surface of the speed bump (two full 300 ml tubes of PL Premium should be used per 6' speed bump).
  4. Position the speed bump on the designated, clean concrete surface.
  5. Step and walk on the top of the speed bump to press it down and esnure the speed bump adheres to the concrete surface.
  6. Leave the speed bump undisturbed for 12 – 24 hrs.*
Notes:
  • Follow the PL Premium recommendation for minimum of 5°C (41°F) temperature of the installation surface.
  • For installation of the speed bump end cap, use about 1/3 of the 300 ml tube of PL Premium and follow the same installation procedure as for the speed bump.

*It is necessary to leave the speed bump undisturbed for at least 12 hours. Closing off the area may be required.